The device is a fully integrated H-bridge motor driver intended for a wide range of automotive applications. The design of monolithic die in a power package offers better robustness and higher reliability. The direction and brake operation of the motor are simply controlled by applying digital signals to the INA and INB. The CS pin allows to monitor the motor current by delivering a current proportional to the motor current value, and it also develops a voltage flag for a failure on the relevant output in the ON state as well as the OFF state. The independent PWM pin, up to 20 kHz, allows to control the speed of the motor easily in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSA and LSB switches.
Product attributes
- AEC-Q100 qualified
Device ambient temperature: -40°C ≤ TA ≤ 125°C
Device junction temperature: -40°C ≤ TJ ≤ 150°C
- Operating voltage: 4 to 28 V, 40 V abs. max
- Maximum oOutput current: 12 A
- RDS(on) : 100 mΩ typ per half bridge
- 3 V CMOS-compatible inputs
- PWM operation up to 20 kHz
- Very low standby current, 1.5 μA max at 25°C
- Protections:
Cross-conduction protection
Overvoltage clamp
Undervoltage shutdown
Current limitation
Power limitation
Thermal shutdown
Output short to ground and short to VCC
Loss of ground and loss of VCC
- CS diagnostic functions:
Analog motor current feedback
OFF-state open load detection
Output short to ground detection
Output short to VCC detection
Thermal shutdown indication
- Flexibility of use as full bridge, dual half bridge and multi-motor driving configuration
Reviews
There are no reviews yet.