DIO5518C

The DIO5518C. is a complete constant-current / constant voltage linear charger for single cell Lithium-Ion batteries. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.35V, and the charge current can be programmed externally with a single resistor. The DIO5518C. automatically terminates the charge cycle when the charge current drops to 1/10 the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the DIO5518C. automatically enters a low current state, dropping the battery drain current to less than 0.5µA. The DIO5518C. can be put into shutdown mode, reducing supply current to 40µA (Typ.). The DIO5518C. is available in a small package with DFN2*2-6, SOT23-5. Standard product is Pb-Free.

Product attributes
Working voltage (min) (V): 4.65
Working voltage (max) (V): 5.5
Charging end current (μ A): 130
Maximum charging current (A): 0.75
Absolute maximum voltage (V): 10
Overvoltage protection threshold (V): 6.2
Battery charging voltage (V): 4.35
Charging threshold (V): 4.2
Drip threshold (V): 2.6
Control interface: VIN
NTC port: Y
Features: OVP/OTP/SCP/PG